LA Audio DLX200 - Manual (Page 9)

9
Operation.
The unit will power up as soon as power is applied to the IEC inlet as there is no power switch.
During the start up process the firmware application model number and version numbers are
displayed and the outputs are muted until the unit has completed its internal checks – this should
take around 5-10 seconds. Once the start-up routines are complete, the processor will restore the
settings as they were, previous to the unit being powered down and gradually ramp up the audio
signal to its correct level.
NAVIGATION
Pressing the channel select buttons will scroll through the channels, then through utilities and back
to the default screen. The currently selected channel is shown in the top left hand corner of the
display. When operating in stereo mode (more on this shortly) the channel selection will reflect this
by showing the names of both paired channels.
DLX 260
F1 F3 F2
< <
CHANNEL
< < PARAMETER
Out 1 Freq Width Gain
EQ1 100Hz 1.4Q 0.0dB
Pressing the edit navigation buttons gives access to the various pages of parameters available for
each channel. The currently selected page is shown in the bottom left hand corner of the display.
The screen shows up to three parameters for a given part of the processing functions on a given
channel.
The edit buttons allow you to scroll in either direction through the different processing pages for a
given Channel. When you go past the last page, you will be returned to the default page.
If you’re scrolling through channels and notice that the edit page has changed, fear not: this is
probably because the selected channel doesn’t have the selected edit parameters. For example,
inputs do not have a low-pass filter.
PRESETS
Your DLX200 processor has 45 presets, each of which capture a complete snapshot of the unit’s
settings. Aside from the unit’s two ‘Base Presets’, described below, you are free to store settings
wherever you wish. To save confusion over which preset does what, your DLX200 also allows you
to name your presets with text labels. Just how sensible they are is entirely up to you.