Dell PowerEdge 350 - Manual (Page 10)

1-2 User’s Guide
•
The System Setup program, which can be accessed at system boot for quickly
viewing and changing the system configuration information for your system. For
more information about the System Setup program, see Chapter 3, “Using the
System Setup Program.”
•
The Dell OpenManage™ software. For information on this software, see the soft-
ware documentation provided with your system.
•
Diagnostics for evaluating your system’s components and devices. For informa-
tion on using the system diagnostics, see “Running the Dell Diagnostics” in your
Installation and Troubleshooting Guide .
Supported Operating Systems
Dell supports the following network operating systems for use on PowerEdge 350
systems:
•
Microsoft
®
Windows
®
2000 Server
•
Microsoft Windows NT ® Server 4.0
•
Red Hat Linux 7. x
NOTE: Installation service and support for other operating systems are available
through DellPlus
™ . For more information, see “Getting Help” in your Installation and
Troubleshooting Guide.
System Orientation
The front panel of your system contains switches, indicator lights, and diskette and
CD-ROM drives. To view the front panel, you must remove the optional front bezel
from the system.
Removing the Optional Front Bezel
To remove the optional front bezel, press the tab on each end of the bezel and lift the
bezel from the chassis (see Figure 1-1).