Labconco CentriVap Mobile Systems 7812014 - Manual (Page 11)

Chapter 3: Getting Started
Product Service 1-800-522-7658 7
Unpacking Your CentriVap
Carefully unpack your CentriVap and inspect it for damage that may have
occurred in transit. If your CentriVap is damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
The United States Interstate Commerce Commission rules require that claims be
filed with the delivery carrier within fifteen (15) days of delivery.
NOTE: Do not return goods without the prior authorization of Labconco.
Unauthorized returns will not be accepted. If your CentriVap was damaged
in transit, you must file a claim directly with the freight carrier. Labconco
Corporation and its dealers are not responsible for shipping damage.
Do not discard the carton or packing material for your CentriVap until you have
checked all of the components and installed and tested the CentriVap.
CentriVap Components
As previously mentioned, the CentriVap System is available in 115V or 230V.
Locate the model of CentriVap you received in the following table. Verify that
the components listed are present and undamaged.
Concentrator
Catalog # Product Description
7812010 CentriVap Mobile System – 115V/60Hz
7812011 CentriVap Mobile System – 230V/50Hz
7812012 CentriVap Mobile System – 230V/60Hz
7812013 CentriVap Mobile System w/Heat Boost– 115V/60Hz
7812014 CentriVap Mobile System w/Heat Boost – 230V/50Hz
7812015 CentriVap Mobile System w/Heat Boost – 230V/60Hz
Plus the Following:
Part #
Component Description
7396603 User’s Manual
1336400
1338000 Power Cord – 115V
or
Power Cord – 230V
1488800 Clamp
7397601 Coupling
Insert
7455100 Rotor (12-13 mm)
7815200 Cartridge, Solvent Trap
If you do not receive one or more of the components listed for your CentriVap, or
if any of the components are damaged, contact Labconco Corporation
immediately for further instructions.