Laerdal Bleeding Trauma Modules User Manual
Page 12

Cleaning Modules after Use:
1. Modules, bag and tubing should be rinsed with water.
2. Flush water through blood system and out of wound.
Care and Maintenance:
1. Clean with mild soap and water; do not submerse
module or parts in cleaning fluids or water.
2. Use only on clean surface. Avoid felt tipped markers, ink
pens, acetone, iodine or other staining products and
avoid placing the modules on newsprint or inked lines of
any kind.
3. To ensure longevity, modules should be cleaned after
each training session and a general inspection should be
conducted regularly.
4. Modules and all other parts should be drained and air-
dried thoroughly before storage and disinfected when
needed.
5. Articulating parts will benefit from a light application of
talcum powder prior to training sessions.
6. Store properly between teaching sessions.
Cautions and Warnings
This product contains Natural Rubber latex which may
cause allergic reactions when in contact with humans.
38 15 50 12 Laerdal