Laerdal Tuff Kelly - Manual (Page 8)

Preparation for Use
Use a clean working surface during assembly to prevent product from getting dirty.
o Tools required (not included):
ƒ Wrench (½ inch)
ƒ Pliers
Gather the waist attachment hardware:
o Lock Nut (2)
o
Washer (2)
o
All Thread Rod (1)
See Fig. 3 & Fig. 4 to assemble the legs & pelvis to the manikin’s torso.
To detach reverse the procedure.
Chest Plate
Fits in the Tuff Kelly torso.
To remove:
1. Detach Chest Plate by applying pressure to center of plate.
2. Work your fingers under edge of plate and lift out.
To insert:
1. Replace Chest Plate over torso cavity.
2. Work edges into groove of torso cavity.
Belly Plate
Fits in the Tuff Kelly pelvis.
To remove:
1. Detach Belly Plate by applying pressure to center of plate.
2. Work your fingers under edge of plate and lift out.
To insert:
1. Replace Belly Plate over pelvis cavity.
2. Work edges into groove of pelvis cavity.
DO NOT
perform any unauthorized modification to the Tuff Kelly manikin or
equipment.
8