Lingenfelter L380180000 Lingenfelter Differential & Transmission Vent Bladder Kit v1.3 - Manual (Page 5)

Page
OPTIONAL STEP: If installing the breather
fitting, run a second hose from the bladder to a
higher point on the vehicle so that the fluid drains
back down to the bladder. Attach the breather
fitting to the hose and use an Oetiker clamp to
secure them together.
WARNING: Be sure to protect the bladder from
exposure to hot exhaust components. If needed,
install a heat shield between the exhaust and the
bladder.
Installation of the LPE Universal Vent
Bladder Kit is now complete.
Installation of the LPE Vent Bladder Kit on
the 2010-2013 Camaro
1. Using a floor jack to support the weight of
the subframe, remove the four (4) rear subframe
bolts. Slowly lower the subframe. Lowering the
rear subframe will provide adaquate clearance
for installation.
4.
2. Place the bladder (PN: XX04556-0010)
into the undercarriage of the vehicle. For 5th
generation Camaros, LPE generally recommends
placing the bladder in the vehicle’s frame,
just above the differential. Make sure that
the bladder’s cut breather tube is portruding
downward from the frame, as shown in the
adjacent picture.