Lingenfelter L500151410 Lingenfelter - Pedders Camaro SS Coil Over Shocks - Manual

www.PeddersUSA.com
248.522.8021
Camaro 160086
Xa Coilovers
•
This handout is designed to assist
qualified technicians. All torque
specifications should be verified to
comply with the most recent
information available from GM.
•
This manual should be used to
supplement established repair manuals
and may not cover all information that
is required.
•
IT IS IMPORTANT TO FOLLOW NORMAL
SAFETY PRECAUTIONS, EYE
PROTECTION AND FEET PROTECTION.
FOLLOW ALL THE SAFETY
PRECAUTIONS ESTABLISHED BY THE
TOOL MANUFACTURERS.
•
This job should take between 4 to 8
hours depending on your skill level.
TOOLS REQUIRED
•
1 ½ ton floor jack
• 2 or 4-1 ½ ton jack stands
• Block of wood to support differential with floor jack
•
22mm socket for OEM lug nuts
•
21mm socket, ½ drive for cradle mount bolts
•
½ breaker bar in case cradle bolts are too tight
• Miscellaneous wrenches, sockets, ratchets ,
extensions from 10mm to 24mm
•
Tape measure, preferably metric (more accurate
and easier to rear
•
½ drive torque wrench that will do 200lbft
•
Wire brush
• Brake or denatured alcohol spray to clean off
thread lock on sub-frame bolts
•
Red LocTite
• Optional ½ drive air impact
•
• 5mm Allen wrench/socket
•
Brass punch or drift
•
Hammer
•
8.5mm drill bit , starter punch drill bits
• Veneer caliper
• Needle nose pliers
•
Camaro 160086 Xa Coilovers will
come with 8kg front and 10kg rear
coil. The Pedders extreme Xa Coil
over kit deliver adjustability in
height and fixed ratio dampening.
The 30 way detente adjustability
allow exact duplication of
adjustment The monotubes
normally are shipped with 8 clicks
from max hard. We encourage you
to use a range of damping
adjustments to learn the
capabilities or your new coilovers.
Here is a general range of damping
adjustment.
OE Comfort Front 6 Rear 3
Street Sport Front 12 Rear 6
Aggressive Sport Front 15 Rear 18
Road Course Front 18 Rear 28
Drag Front 3 Rear 16