Camaro 160086 xa coilovers – Lingenfelter L500151410 Lingenfelter - Pedders Camaro SS Coil Over Shocks User Manual
Page 13
www.PeddersUSA.com
248.522.8021
Camaro 160086
Xa Coilovers
11.
Install the top shaft with spacer and washer into the top mount
then fit upper side mount washer in the correct direction and new included
nyloc nut and tighten top mount
**NOTE** Ensure that adjuster is correctly aligned with flexible extension
while tightening top mount assembly and the cable is exactly at 90 degrees
and not kinked in any way. Tighten the top strut nut until is it tight using a
wrench to hold the shock and another wrench to turn the nut.
DO NOT USE AN
IMPACT GUN OR ANY KIND OF AIR TOOL. INSTANT DAMAGE WILL OCCUR AND
WILL NOT BE COVERED BY WARRANTY
9.
Attaching the cable to the
strut know on the side can
be done without
disassembling the strut.
But it is challenging to get
the Allen screw inside and
tightened correctly. So to
make it easier, we will take
maybe 5 minutes and
disassemble the spring,
spring seats
and lower mount from
shock, leaving only shock
body, shaft and boot.
10.
Assemble the spacer and
underside mount washer
to the top of the strut
shaft as pictured on the
left.