Timing retard activation (cont...), Microedge+ driver module, Timing retard 1 or 2 output (pink or tan) – Lingenfelter L460145297 Lingenfelter LNC-2001 LS Timing Retard Launch Controller LSA LS9 v1.7 User Manual
Page 21

Ground
85
86
30
87a
87
MicroEDGE+
Driver
Module
Ground
Ground
+12 Volts
Switched
LNC-2001
Red = MAP +5V
Black = MAP/Linear Ground
Purple = MAP/Linear Signal
F
= Linear Mode
.2 Volt = 0*
4.8 Volt = 15*
Max Retard
To +12V Side of Nitrous Solenoid
To +12V Side of Fuel Solenoid
To the Ground
Side of the
Solenoids
30 Amp
Fuse
+12V from Battery
LNC-2001 Receiving +12V Retard Activation Input from the Harris Speed Works MicroEDGE+
(Using a Single Nitrous Stage)
In order to use the LNC-2001
with the MicroEDGE+ controller,
the stage that the LNC-2001 is
connected to CANNOT be
progressively controlled.
Stage 1 Relay
The “MicroEDGE+” name is property of Harris Speed Works Inc.
LNC-2001 Receiving +12V Retard Activation
Input from the Nitrous Express MAXIMIZER 4
LNC-2001
Red = MAP +5V
Black = MAP/Linear Ground
Purple = MAP/Linear Signal
F
= Linear Mode
.2 Volt = 0*
4.8 Volt = 15*
Max Retard
+12V LNC-2001 Retard
Activation Input
(Orange)
Timing Retard
1 or 2 Output
(Pink or Tan)
The “Maximizer 4” name and logo, as well as the “NX” name and logo, are
property of Nitrous Express Inc.
Timing Retard Activation (Cont...)
Page 20 of 26