Lingenfelter L510050197 Lingenfelter C5 C6 Corvette Front Subframe Spacer Kit v1.0 - Manual (Page 2)

Page 1.
Parts List
C5 & C6 Stainless Steel 1/4” Front Subframe Spacer Kit
# Description Part number
2 1/4” spacer for subframe, rear XX04468-003
2 1/4” spacer for subframe, front XX04468-004
Tools & Materials Required
• (2) temporary spacers, 3”x1-1/2”x1/2” block,
wood or plastic
• Jack Stands
• Torque wrench
• Metric deep socket set
• pry bar or equivalent
• ratchet
Thank you for purchasing the Lingenfelter Performance Engineering (LPE) C5/C6 Corvette
front subframe spacer kit. This kit will raise the frame of the C5/C6 Corvette by roughly 1/4”
in relation to the engine, which will in turn provide added clearance above the engine for a
supercharger or other various engine components. The C5/C6 Corvette front subframe spacer
kit offers an alternative to purchasing an aftermarket hood for applications where only a small
amount (1/4” or less) of added hood clearance is required.
Read the entire instruction manual before beginning installation.