Lingenfelter Katech Cadillac CTS-V Stainless Steel Short Throw Shifter - Manual

Created on 11/30/2007 Page 1 of 10
Short-throw Shifter Installation Guide
Removal Procedure
1) Remove the shift control knob.
A. Lift up on the rear portion of the shift control closeout boot retaining
ring and detach the retaining ring from the console.
Important
Detaching the shift control knob from the shift lever may require a
large amount of physical effort.
B. Firmly grasp the shift control knob and pull straight up to detach
the shift control knob from the shift lever.
C. Remove the shift control closeout boot and knob assembly.
2) Remove the sound insulator foam block from the
console.
3) Remove the bolts (2) securing the shift control
assembly to the shift control adapter plate.
4) Raise the vehicle.
5) Remove the exhaust system.
A. Remove the 2 bolts securing the floor panel tunnel brace to the
floor panel.
B. Remove the floor panel tunnel brace from the floor panel.
C. Suitably support the exhaust system.
D. Remove the exhaust pipe nuts securing the exhaust pipes to the
catalytic converters
.