Lingenfelter L650162012 Lingenfelter Camaro ZL1 Air Intake Kit 2012-13 v1.1 User Manual
Page 7
Advertising
Page 6.
18. Rotate the inlet elbow clockwise until it
can be connected to the throttle body. Connect
the hump hose to the throttle body. Disengage
all four (4) of the worm clamps and place the
clamps over the narrow parts of the hump hoses.
Using an 8mm socket, secure the hump hoses.
Do not overtighten.
19. Connect the stock breather hose to the 45
degree breather adapter.
20. Connect the MAF sensor harness
connector to the MAF sensor housing. You
should hear a click when the connector is fully
engaged. Slide the grey tab to lock the MAF
sensor connector in place.
21. Using a 10mm socket, remove the ground
stud located on the front driver-side corner of the
engine compartment.
Advertising