LW Measurements HRB 3002 - Manual (Page 17)

17
4.2.2 Parameter settings
4.2.2.1 Setting Zero range when power on
Press ON/OFF key, and when
“- - - - - - “ shows, press PCS key, display will show “Pzr x.x”, press UNIT
key to select, factory default setting is 20
4.2.2.2 Setting Zero range of ZERO key
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key, display shows
“Kzr xx”, press UNIT key to select, factory default setting is 4
4.2.2.3 Setting Zero range of TARE key
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Ktr xxx”, press UNIT key to select, factory default setting is 100
4.2.2.4 Setting overload range
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Ovr xx”, press UNIT key to select, factory default setting is 9d
4.2.2.5 Setting Beeper
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “b2 ON” or “b2 OFF”, press UNIT key to switch it ON or OFF.
4.2.2.6 Setting ZERO and TARE function merge function
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “Zt ON” or “Zt OFF”, press UNIT key to switch it ON or OFF, in this model, it has to be
set OFF
4.2.2.7 Setting Auto Shut off
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “A ON” or “A OFF”, Press UNIT key to select Auto shut off mode “ON” or “OFF”.
4.2.2.8 Setting Backlight
Press ON/OFF key, and when
“- - - - - - “shows, press PCS key, and then press ZERO key multiple times
till display shows “L ON”, “L OFF” or “ L AU”, Press UNIT key to select backlight to be “On”, “Off” or “Auto”.