LW Measurements KHR 502 - Manual (Page 20)

20
4.2.3 Weighing
4.2.3.1 Before Weighing
Whenever possible, allow the machine to warm up for 10 minutes after first
turning on, to ensure the machine will function properly and accurately
4.2.3.2 Error Messages

Err-0: Overload which means you have placed more weight on the
machine then it is programmed to handle

Err-b: Low battery
4.2.3.3 Weighing Procedures

Press [ON/OFF] to turn scale on

Press [UNIT] to select a weighing unit (kg, g, lb, oz, lb:oz)

Once the unit has been selected, the selected unit will be displayed
next to the weight value

Start weighing!
o If you do NOT use a container (or the supplied bowl), verify
the reading is
“0”
 If the display does not show “0”, press [ZERO] to
display
“0”
 Place your item/s to be weighed on the platform
o If you DO use a container (or the supplied bowl):
 Place an empty container (or the supplied bowl) on
the platform
 Wait for the weighing value to stabilize
 Press [ZERO]
to display “0”
 Place your item/s to be weighed in the container or
bowl