LW Measurements SCT 1200 - Manual (Page 21)

21
- CE KEY is used for cancelling the numeric setting data
or to cancel the previous unit weight data.
- QTY/SET KEY is used to alternate between normal
counting and quantity check operation.
- [M+] MEMORY KEY is used to store the count data, and
can store up to 99 data sets .
4.1.3 Clearing the total weight
- Press the TOTAL key to show the total pieces on the
third line of the display.
- Press the MC key to show the unit that will be cleared.
- Press the CE key to confirm clear.
5 Operation
5.1 Tare
5.1.1 Clearing tare weight
-
Place an empty container on the platter. Press the
TARE key. The WEIGHT display shows 0.000.
- When the container is removed from the platter, the
WEIGHT display will show a minus (-) value which is the
weight of the container.
5.1.2 Clearing previous tare value