LW Measurements SCT 1200 - Manual (Page 8)

8
If there should be any reason to believe that it is no longer
possible to operate the weighing machine without danger, the
weighing machine is to be immediately unplugged from the
electricity supply (pull out power adapter) and secured against
inadvertent operation.
In carrying out maintenance work, it is essential to follow the
recommendations in Chapter 6 Maintenance and service.
The weighing machine must not be operated in an area
subject to explosion risks.
Care must be taken when weighing liquids to ensure that no
liquid is spilled into the inside of the weighing machine or into
connections on the rear of the equipment or the power
adapter. If liquid is spilled on the weighing machine, it must
immediately be unplugged from the mains electricity supply
(pull out power adapter).
The weighing machine may only be operated again after it has
first been re-checked by a service technician.
These operating instructions must be read by each operator of
the equipment and must be available at the workplace at all
times.