Configuring sip line settings, Configuring system settings – MOCET IP3062 User Manual
Page 44
Page 44
MOCET IP3062 Professional IP Phone User Guide
Feature Code
Set speed dial for feature codes.
DTMF
Set DTMFs for call.
Save Settings
Save changes in this page to the phone.
Cancel
Discard all changes in this page.
4.6. Configuring SIP Line Settings
On the SIP tab of the web user interface, you can change various SIP settings for each
Line.
A user can block specific calls by Caller ID (CLID). For each SIP Line, you can configure
up to 10 blocking entries.
Field Name
Function
Always Call Forwarding
Enable/disable always call forwarding.
Busy Call Forwarding
Enable/disable busy call forwarding.
No-Answer Call Forwarding
Enable/disable no-answer call forwarding.
DND Call Forwarding
Enable/disable DND call forwarding.
No Answer Timeout
Set no answer timeout time (seconds).
Always Forward Destination
Set always forward number.
Busy Forward Destination
Set busy forward number.
No-Answer Forward Destination
Set no answer forward number.
DND Forward Destination
Set DND forward number.
Enable Block Anonymous Call
Enable/disable block anonymous call feature.
Caller Blocking Entry 0~9
Set caller blocking numbers.
Save Settings
Save changes in this page to the phone.
Cancel
Discard all changes in this page.
4.7. Configuring System Settings
On the System tab, the user can access or change:
Password
Time settings
Debug logs
Reboot the phone