Phone firmware upgrade – MOCET IP3062 User Manual
Page 49
Page 49
MOCET IP3062 Professional IP Phone User Guide
6. Phone Firmware Upgrade
The IP3062 supports several different ways to update its firmware (please refer to the
table below). This is for system administrators or service providers. End users normally do
not have to upgrade firmware by themselves. Please contact your Administrator or service
provider for assistance.
No.
Firmware Upgrade
Method
Method Description
User Admin. Dist.
1
Upgrade using web
browser on a
specified computer
Download SW Update Pack from PC
that Dual Kernel Image and
Upgradable Applications are
supported.
2
Upgrade from USB
memory dongle*
Engineering keys sequence or LCM
Menu command or Web action or
Auto Detection.
3
Auto-Provision
upgrade with MOCET
Auto-Provisioning
System (APS)
Firmware upgrade via
TFTP/HTTP/HTTPS mass
provisioning by using MOCET APS
protocol with encrypted XML
configuration file.
4
Engineering key
sequences on boot
1. Download complete flash image by
U-boot at system reboot. 2.
Download SW Update Pack from
TFTP server. 3. Download SW
Update Pack from USB dongle.
5 Emergency Upgrade
Auto-detect (when the image
checksum is wrong) and download
complete flash image from TFTP
server at fixed IP address.
Note: Upgrade firmware from USB memory dongle needs to contact your distributor (or
service provide) to acquire the USB memory dongle with the authorized firmware.