Instructions for setup, Gogo – NEMO Equipment GOG EX User Manual
Page 5
®
Connect Pump
Connect the black valve end of your Integrated Pump to the airbeam
inflation valve. You should hear an audible click when your pump is
connected properly.
Stake Corners
Secure the anchors by pounding the stakes into the ground
with a rock or hard object. If the ground is too hard, tie the
anchors to a rock or another heavy object.
Inflate Airbeam
To inflate the Gogo™ EX airbeam with the Integrated Pump,
repeat the sequence of blowing into the mouthpiece and
squeezing the fabric pouch until squeezing becomes difficult.
Attach Fly
Attach fly to tent using four plastic buckles. Stake out the side vestibule
and tension the anchor. Add a stick to the Swallowtail end of Gogo™ EX
for better tension and venting.
Locate Valve on Airbeam
Remember to leave no trace. Before leaving your campsite, take a thorough look
around making sure you have not left anything behind, out of place, or damaged.
To contact NEMO Customer Service
Email: [email protected]
Phone: 800-997-9301
GOGO
™
EX
INSTRUCTIONS FOR SETUP
Locate the black Inflation Valve with protective red cap. If the Deflation
Cap is connected, remove by pressing the button and pulling. During
takedown, reconnect the Deflation Cap to aid in quick deflation.
1
2
3
4
5
©2011 NEMO Equipment, Inc.