NEMO Equipment LOS 3P - Manual (Page 2)

1
1
7
6
2
4
4
9
9
8
8
7
5
5
6
3
3
12
10
11
1. Main Poles
2. Ridge Poles
3. Mesh Canopy
4. Swivel Hub
5. Intersection Hub
6. Jake’s Foot Pole Anchors
7. Dual Side Doors
8. High Splash Guard Floor
9. Ball Cap Ridge Pole Connector
10. Overlap Vent in Rain Fly
11. Vestibule Door
12. Jake’s Foot Fly Attachment
LOSI™ 3P Innovations
1. Superior Hardware: Several innovative pieces of
hardware are used to increase the ease of setup and
strength of Losi™ 3P.
The DAC Jake’s Foot corner anchor system makes
tent setup faster and easier. The main poles attach
to the anchors by ball and socket. When the fly
is attached, the Jake’s Feet act as cantilevers to
pull the corners of the inner tent closer to the
ground. The Jake’s Feet also allow you to set up
your fly and poles without the inner tent to create
a convenient tarp/shade shelter.
Ball Caps™ are used in place of locking pole tips
and grommets to secure the ends of ridge poles.
The Ball Cap™ snaps onto an aluminum ball tip at
the end of the ridge pole.
The Intersection Hubs and center Swivel Hub lock
the poles together at each location where they
cross. This makes the tent much stronger and
resistant to wind forces.
The unique shape of the DAC pole clips makes
them easy to use and more durable than standard
pole clips.