NEMO Equipment MET 2P - Manual (Page 3)

GUARANTEE
NEMO QUALITY RECOMMENDED
INNOVATIONS
NEMO PRODUCT
TECHNOLOGY
POLE SUPPORTED
TECHNOLOGY
AIRSUPPORTED
EXTREME CONDITIONS
EXTREME CONDITIONS POLE SUPPORTED
TECHNOLOGY
EXTREME CONDITIONS
STATISTICS
NEMO PRODUCT
NEMO is constantly developing new pole tech-
nology, hardware, and frame configurations to
maximize the strength, wind resistance, interior
volume, weight, and usability of our tents. We pur-
sue simplicity and pure geometric forms wherever
possible. Classic arch shapes are used to fend off
top loads and catenary curves transfer tension
through fabric panels. Every design element is
deliberate and has a functional purpose, much
like nature itself.
META™ 2P HIGHLIGHTS
Smart design and straightforward functional-
ity make the setup of Meta™ 2P a cinch. Simply
stake out each of Meta™ 2P’s anchor points and
insert/expand your trekking poles until the tent
is properly tensioned, about 49 inches. Oversized
grommets locate the tips of your trekking poles
and reinforced areas at the top of the tent receive
the pole handles. A total of eight anchor points
keep Meta™ 2P nailed to the ground, vented, and
weatherproof.
A combination of venting options help combat
condensation and promote air circulation. A large
rear vent can be deployed by staking out the
reflective guy-out cord at the back of the tent. A
reinforced hoop keeps the upper vent open at all
times, allowing low-to-high ventilation.
Two vestibules and doors eliminate jostling for
position and gear storage. Both vestibules can be
used in multiple configurations depending on the
weather or privacy needs.