NEMO Equipment OB 3P - Manual (Page 3)

GUARANTEE
NEMO QUALITY RECOMMENDED
INNOVATIONS
NEMO PRODUCT
TECHNOLOGY
POLE SUPPORTED
TECHNOLOGY
AIRSUPPORTED
EXTREME CONDITIONS
EXTREME CONDITIONS POLE SUPPORTED
TECHNOLOGY
EXTREME CONDITIONS
STATISTICS
NEMO PRODUCT
NEMO is constantly developing new aluminum
pole technology, hardware, and frame configura-
tions to maximize the strength, wind resistance,
interior volume, weight, and usability of our tents.
We pursue simplicity and pure geometric forms
wherever possible. Classic arch shapes are used
to fend off top loads and catenary curves transfer
tension through fabric panels. Every design ele-
ment is deliberate and has a functional purpose,
much like nature itself.
OBI™ 3P HIGHLIGHTS
The DAC Jake’s Foot corner anchor system makes
setup fast and easy. The Jake’s Feet also improve
fabric tension by acting as cantilevers to pull the
corners of the inner tent closer to the ground.
Pole hubs at the front and rear of the tent allow
multiple poles to intersect at a single point creating
a unique pole architecture that allows free-stand-
ing support while minimizing pole weight.
Strategic controlled bends in the poles achieve
a maximum volume to weight ratio. By utilizing
bends in just the right places, this pole set creates
about one and a half times the volume of standard
unbent pole sets of similar weight.
Two doors and two vestibules eliminate jostling
for position and gear storage. Both vestibules can
be used in multiple configurations depending on
weather conditions and your need for privacy.
Strategic cutouts in the fly combined with high
bathtub walls allow low-to-high ventilation. Even
when the vestibules are fully closed, catenary cuts
allow air movement under the vestibule and into
the tent.