Instructions for setup – NEMO Equipment TENSH User Manual

Page 9

Advertising
background image

®

Attach Condensation Curtain™

Attach the Condensation Curtain™ by the Velcro® in the tent corners
and Velcro® straps along the poles. The two additional Velcro® straps
along the floor are optional.

Stake Corners (optional)

Secure the corner anchors by pounding the stakes into the ground
with a rock or hard object. If the ground is too hard, trap the stakes
under a rock or another heavy object.

Attach Vestibule

Slide the pre-bent pole through the sleeve on the vestibule and insert
the end tips through the grommets on the vestibule and tent. Zip the
vestibule onto the tent. Stake the corners and tension.

Tension and Guy-lines

In severe weather, clip guy-lines to reflective webbing loops on tent,
and stake out several feet away. This will add considerable strength
to the tent. Be careful of guy-lines as tripping hazards.

Inside Tenshi™, place the end of one long pole into a far corner. Bend
the pole into the diagonal corner. Make sure the pole ends sit in metal
buttons. Repeat with second long pole. Secure with Velcro® wraps.

Insert Poles and Secure

Remember to leave no trace. Before leaving your campsite take a thorough look
around making sure you have not left anything behind, out of place, or damaged.

To contact NEMO Customer Service

Email: [email protected]

Phone: 800-997-9301

INSTRUCTIONS FOR SETUP

©2010 NEMO Equipment, Inc.

TENSHI

1

2

3

4

5

Advertising