NEMO Equipment MOK VESTIBULE - Manual (Page 4)

Setup Guide
1. Zip the upper vestibule panel to the vestibule. NOTE: Be sure to use the upper
vestibule with zipper flap, not the Connection Panel with red Velcro®. Slide the
vestibule pole through the pole sleeve. Attach the end tips to the grommets in
the vestibule and tent anchors, and tighten webbing to hold vestibule in place.
Zip the upper vestibule to the tent.
2. Stake your vestibule while it is zipped closed. Place the stake through the
anchor and adjust the webbing for proper tension.
3. In extreme weather, attach the supplied guy lines to the guy-out loops and
stake in place. In high winds, it is best to face the main doors or vestibule into
the wind.
4. The full-size vestibule provides plenty of additional space for gear storage and
a dry entry during bad weather. On sunny days, the vestibule is easily removed
by unzipping it from the tent. Remember you should never cook inside your tent.