Wind and snow load calculation – Palram SUNLIT User Manual

Page 6

Advertising
background image

4

4

Wind and Snow Load Calculation

Local building codes and standards in most countries provide details for required design loads, which should be consulted before
installation. The information below is provided for general reference.

Conversion of Wind Velocity Values into Wind (or Static) Pressure

Property

Units

Wind Strength Level

Moderate

Strong

Storm

Hurricane

Wind velocity

Km/h

20

40 - 60

80 - 100

120 - 140(+)

m/sec

6

11 - 17

22 - 28

33 - 40

Static pressure

Kg/m²

2

8 - 17

30 - 50

70 - 100(+)

psf

0.4

2 - 4

6 - 10

14 - 20(+)

Snow Load: Snow load from accumulated snow cannot be disregarded. Both structure and glazing should be suitable for this extra
weight. When choosing greenhouse roofing material for snow-bound areas, a single wall corrugated polycarbonate roofing (e.g.
SUNTUF or SUNSKY) may become preferable. Please consult with your Palram distributor.

Indicative snow load

Per 1.0 cm (0.4 inch) of height or thickness

Fresh, fine, fluffy snow

From 0.8 to 1.9 kg/m² (0.16-0.39 psf )

Wet, watery, compacted snow

From 2.0 to 8.0 kg/m² (0.41-1.64 psf )

Spacing and Load Calculations for Different Methods of Installation

1. Four Sides Clamp or Frame

This method utilizes comparatively small, separate glazing elements, cut from larger sheets. SUNLITE is put inside a four-sided frame
or supporting structures, and clamped on all sides. Clamping is done by plastic, wood or metal clamping profiles, with or without
rubber sealing strips, and fastened by nails, screws or bolts to the supporting frame. The frame itself can be made of wood or metal,
according to the design.

Figure 3a

Typical four sided clamp installation:

“wet” method, steel frame.

Figure 3a

Typical four sided clamp installation:

“wet” method, steel frame.

The table on top the next page presents the recommended center-to-center spans, for each type of SUNLITE sheet at various wind
or snow loads.

Фиксирующий профиль

Силиконовый герметик

Резиновые уплотнительные

прокладки с двух сторон

Остекление SUNLITE

Опорная рама

Clamping profile

Silicone sealant

Rubber packing strips

on both sides

SUNLITE glazing

Supporting frame

Advertising