Parr Instrument 6750 - Manual (Page 13)

Proximate Interface
P a r r I n s t r u m e n t C o m p a n y 12
Data Entry Controls (Continued)
Data Sources:
This key accesses a sub-menu where the user can
select input devices for each of the following types
of data:
Note: Ash fusion and FSI only come from the key-
board.
t
ADL/Total Moisture – Touchscreen / Balance Port
/ Network
t
Moisture Source – Touchscreen / Balance Port /
Network
t
Ash Source – Touchscreen / Balance Port / Net-
work
t
Volatile Matter Source – Touchscreen / Balance
Port / Network
t
Spike Weight Source - Touchscreen / Balance Port
/ Network
t
Sulfur Source – Touchscreen / Balance Port /
Network
t
Btu Source – Touchscreen / Balance Port / Net-
work
t
Btu Weights Source – Touchscreen / Balance Port
Network Device IP Addresses
This key accesses a sub menu where the user can
input the IP addresses of equipment attached to the
network.
Reporting Controls
This key accesses a sub-menu where the user
can establish the report format for the local printer
port.
Report Width
This key allows the user to select either 40 or 80 col-
umn report width. Select 40 when the 1758 Printer
is used.
Report Format
This setting allows the user to select the type of
report format for the printer or device attached to
the local printer port, either Data or Text. When Data
is selected, only numerical items are reported with a
comma delimiter.
Individual Printed Reports
When set to ON, will generate header information
for each report printed. In the OFF position, only one
header will be printed for a series of tests.
Edit Final Reports
When set to ON, this enables the user to revise
sample weights and related values contained in fi nal
reports.
Report Inclusions
This key leads to a submenu that allows the user to
select which analyses (and associated bases) are re-
ported. Proper selection of the tests that correspond
to the types of analyses actually done will determine
when a report becomes fi nal. This selection will also
determine which kinds of test choice keys are dis-
played during a data entry session.
t
Btu
t
Btu Weights
t
Sulfur
t
Moisture
t
Ash
t
Volatile Matter
t
ADL / Total Moisture
t
FSI
t
Ash Fusion (oxidizing and reducing)
t
Spike Weight