Pitney Bowes DI600 Inserting System - Manual (Page 58)

4 • Supervisor Functions
4-6 SV40221 Rev. C
Create From
What is it?
A Supervisor can use the Create From function to create a NEW Job
Definition which is SIMILAR to an existing job and leave the existing
Job Definition untouched. This can save time programming a new
Job Definition when it is almost identical to an existing job but for a
small change such as an extra Insert or Sheet, etc.
The machine will copy the existing Job Definition and ask for the new
job to be named. It will then allow you to edit the new job to meet the
slightly changed requirements.
Where is it?
From the Home Screen...
select Menu
select Supervisor Functions
enter the Supervisor Access Code (see page 4-2)
select Create From
Action…
Once Create From has been selected, choose the Job Definition
you wish to use as the basis of the new job from the alphabetical job
list using the ▲▼◄► keys in the normal way.
Once the Job Definition that you are ‘creating from’ has been
selected, the machine will prompt you to enter a new Job Name (as
no two Job Definitions can have the same name).
After the Job Name has been entered, the machine will ask you to
enter the Job Comments. The following screens will then be as in
Edit Job described on page 4-4.
TIPS:
The machine’s memory holds a maximum of 20 Job
Definitions.
All the tips for
Edit Job (page 4-5) also apply.