Qsonix Qsonix - Manual (Page 8)

8
More Touchscreen Tips
TROUBLESHOOTING
If you are experiencing trouble with your touchscreen controller, refer to the following table. If the problem persists,
please contact your local dealeror Qsonix for assistance.
Solutions to Common Problems Problem Suggestion(s)
The screen does not respond after you turn on
the system. Check that the monitor’s Power Switch is on. Turn off
the power and check the monitor’s power cord and
signal cable for proper connection.
Characters on the screen are dim Try Adjusting the brightness using th OSC controls.
The screen is blank During operation, the monitor screen may
automatically turn off as a result of the Power Saving
feature. Press any key to see if the screen reappears.
Refer to the On screen Control Options section above
to adjust the brightness.
Touch doesn’t work Make sure the touch cable is securely attached at both
ends.
DO
hold your finger perpendicular
to the screen, so that the
fingertip makes contact with the
glass.
DON’T
drag your whole finger over the glass,
or rest your fingers on the panel.
90°