Qsonix Q100 System - Manual (Page 41)

41
Fre
Q; How do I use the SPDIF digital output on the Q100?
quently Asked Questions
A: Go
the “P
choic
digital capable sound system. NOTE: The Q100 can only output one zone of digital output, you must use
analog mode if you are using both zone 1 and zone 2 outputs.
Q: My system has stopped responding or is not operating properly, what should I do?
to the system preferences menu by clicking on the Qsonix logo in the menu Bar. Be sure you are on
layback” tab, and click the “Advanced Settings” button. On this screen you will see the button
es for “Analog” or “Digital”. Choose Digital, and be sure your Q100 is connected to a an appropriate
A: If you experience any problems, you should reset the system by using the “reset” function in the
“preferences/Information” screen, or recycle the power on the system. All music data, playlists and
preferences are stored immediately, so you should NOT experience a loss of information.
Q: Why doesn’t my Q100 always recognize my CDs?
A: The CD recognition and data service is a comprehensive system, however given the number of CDs, slight
variations and multiple releases of similar CDs, you are bound to experience a “Not Found” situation. Use
the CD entry wizard to enter the information yourself.