RODE Microphones HS1 - Manual (Page 18)

I N C LU D E D ACC E S S O R I E S
- 18 -
WAT E R R E S I S TA N T P O P F I LT E R
The pop fi lter is an optional attachment to your HS1 which reduces
plosives (gusts of wind noise caused by hard sounds such as ‘p’
or ‘t’.) It is also strongly recommended you use your pop fi lter to
protect the HS1 in any extreme environments which are overly dusty
or moist to prevent damage to the mic.
To correctly fi t your pop fi lter, slide the fi lter over the microphone
head until it reaches the fi rst groove. Pushing the fi lter any further
down will result in decreased protection of the capsule.
Mic with pop fi lter
Mic with no wind protection
117-950-3-1-HS1_manual.indd 18 117-950-3-1-HS1_manual.indd 18 28/11/2012 3:48:12 PM 28/11/2012 3:48:12 PM