RODE Microphones Stereo VideoMic Pro - Manual (Page 14)

14.
PG1 PISTOL GRIP
The Stereo VideoMic Pro can also be mounted on the PG1 pistol
grip. This allows independent movement of the microphone from
your video camera. The Stereo VideoMic Pro is mounted onto the
PG1 via the shoe mount in the same way you would mount your
microphone to your camera.
Before sliding the camera shoe into place, turn the fastening ring
anti-clockwise to loosen and provide enough leeway. Slide the
Stereo VideoMic Pro’s camera shoe into the groove at the top of the
PG1, rear fi rst. Then twist the fastening ring clockwise to tighten until
the microphone is fastened securely. The VC1 stereo extension lead
will assist in connecting your microphone to your camera or sound
recorder for remote use.
O P T I O N A L A C C E S S O R I E S
BOOMPOLES
The Stereo VideoMic Pro may be mounted on a Boompole,
Mini Boompole or Micro Boompole via the 3/8” thread located
at the bottom of the camera shoe mount. This allows you to move
the microphone closer to your sound source independent of your
camera.
To mount the microphone, match the thread on the Stereo VideoMic
Pro to the screw at the tip of the boompole, and twist clockwise
until securely fastened. The VC1 stereo extension lead will assist in
connecting your microphone to your camera or sound recorder for
remote use.