RAVE Sports Rope Swing Freestanding Package - Manual (Page 8)

7
C A U T I O N
DO NOT USE AN AIR COMPRESSOR TO INFLATE
THIS PRODUCT. USE OF AN AIR COMPRESSOR MAY
CAUSE OVER-INFLATION, WHICH CAN DAMAGE OR
RUPTURE SEAMS, THUS VOIDING THE WARRANTY.
IMPORTANT:
It is normal for the air pressure within air filled tubes to fluctuate
depending on air and water temperatures. It may be necessary
to increase or decrease the air pressure in your product
accordingly. To avoid damage on extremely hot days it may be
necessary to check and release the air pressure from your
product throughout the day.
Connecting Rope Swing to a RAVE Aqua Jump or Bongo:
Assembly Instructions
Step 1: Unpack the contents.
Lay the inflatable base tube on a flat surface. Make
sure there are no sharp objects under the product
that might puncture the material.
Step 2: Attach inflatable platform to base tube
Orient the grey inflatable platform on top of the base tube so the non-
slip tread area is towards the legs of the base tube.
Align all four platform connecting mounts so they fit together like the
hinge of a door and insert pins into the mounts. Secure the pins in
place with the retaining clips.
!!