Rocktron Xpression - Manual (Page 61)

To reload user data from a sequencer
Operating the Xpression
Connect a standard MIDI cable from the MIDI OUT of the transmitting sequencer to the
MIDI IN on the receiving Xpression. Step 1
IMPORTANT: Do not allow a looping connection from the MIDI OUT/THRU of the receiving Xpression
back to the MIDI IN of the transmitting sequencer.
Turn the FUNCTION SELECT controls on both the receiving Xpression until "MIDI DUMP/
LOAD" is displayed.
MIDI DUMP/LOAD
RECEIVING XPRESSION
Turn the PARAMETER SELECT controls on the receiving Xpression until "BULK DUMP/
LOAD" is displayed.
MIDI DUMP/LOAD
RECEIVING XPRESSION
Step 3
Step 2
58