Rocktron Xpression - Manual (Page 68)

Step 1
Selecting a Configuration
Turn the FUNCTION SELECT control fully clockwise to "CONFIG SELECT".
The Xpression allows you to select which configuration—Classic or Rotary—is active for the
current preset.
CONFIG SELECT
Operating the Xpression
Step 2 Turn the PARAMETER SELECT control to access the "XXXXXXX SELECTED" parameter.
Step 3 Turn the PARAMETER ADJUST control to select the desired configuration.
ROTARY SELECTED
Step 4 Press the STORE button to save the selected configuration. "STORED" will flash briefly on
the Xpression display.
STORED
CLASSIC SELECTED
65