Rocktron BASS200 - Manual (Page 6)

HIGH Input Jack
Using a standard guitar cable with a 1/4” jack - plug your bass into this jack. This input jack
was designed for passive basses (without batteries), however, you may plug your active bass
into this input for a higher gain structure.
LOW Input Jack
Using a standard guitar cable with a 1/4” jack - plug your bass into this jack. This input jack
was designed for active basses (with batteries), however, you may plug your passive bass into
this input for a softer gain structure.
DEEP Button
When the Deep button is pressed IN, a fixed EQ is applied to the preamp to give a BASS
boost to the sound of +8dB at 50Hz.
BRIGHT Button
When he Bright button is pressed IN, a fixed EQ is applied to the preamp to give a TREBLE
boost to the sound of +10dB at 10k Hz.
EQ Button
This button switches the EQUALIZATION section IN or OUT.
GAIN Control
The control adjusts the overall “GAIN” or distortion of the signal.
SHAPE Control
This control adjusts the overall tonal shape of the EQ. Turning the control clockwise will
increase the high frequencies. Turning it counterclockwise will provide a boost to the low
frequencies.
1
2
3
4
5
6
7
Front Panel