Precautions – Rocktron Rampage R50 DSP User Manual
Page 2
Your Rocktron Rampage R50DSP amplifier has been tested and complies with the following Standards
and Directives as set forth by the European Union:
Council Directive(s):
89/336/EEC, 73/23/EEC
Standard(s):
EN55022, EN50082-1, EN60065
This means that this product has been designed to meet stringent guidelines on how much RF energy it
can emit, and that it should be immune from other sources of interference when properly used.
Improper use of this equipment could result in increased RF emissions, which may or may not interfere
with other electronic products.
To insure against this possibility, always use good shielded cables for all audio input connections. This
will help insure compliance with the Directive(s).
Copyright © 2002 GHS Corporation
All Rights Reserved.
NOTE: IT IS VERY IMPORTANT THAT YOU READ THIS SECTION TO PROVIDE
YEARS OF TROUBLE FREE USE. THIS UNIT REQUIRES CAREFUL HANDLING.
• All warnings on this equipment and in the operating instructions should be
adhered to and all operating instructions should be followed.
• Do not use this equipment near water. Care should be taken so that objects do
not fall and liquids are not spilled into the unit through any openings.
• The power cord should be unplugged from the outlet when left unused for a
long period of time.
DO NOT ATTEMPT TO SERVICE THIS EQUIPMENT. THIS EQUIPMENT SHOULD
BE SERVICED BY QUALIFIED PERSONNEL ONLY. DO NOT MAKE ANY
INTERNAL ADJUSTMENTS OR ADDITIONS TO THIS EQUIPMENT AT ANY TIME.
DO NOT TAMPER WITH INTERNAL ELECTRONIC COMPONENTS AT ANY TIME.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY VOID THE WARRANTY OF
THIS EQUIPMENT, AS WELL AS CAUSING SHOCK HAZARD.
OPERATING TEMPERATURE
Do not expose this unit to excessive heat. This unit is designed to operate between 32° F and
104° F (0° C and 40° C). This unit may not function properly under extreme temperatures.
Precautions
Downloaded from
manuals search engine