Front panel – Rocktron Rampage R50 DSP User Manual
Page 3
INPUT JACKS - LOW AND HIGH
Connect the output of your guitar to one of the 1/4”input jacks with a shielded guitar cable. Select
LOW for normal, or HIGH for extra gain. Plugging into the LOW input will attenuate your guitar’s
signal cooling down a “hot” guitar. These two jacks provide slightly different input levels. Experi-
ment with these and adjust to your tastes.
CLEAN Section
- GAIN Control Knob - Turning this knob clockwise determines the amount of gain (or distortion) added to the signal. A wide range
of amp tones are available from Pristine clean to Heavy Texas Blues
- LEVEL Control Knob - Turning this knob clockwise determines the overall volume of the CLEAN channel.
CH SELECT Button & CL & OD LEDS
Channel Select button - allows you to select between the CL (CLEAN) channel or the OD (OVER-
DRIVE) channel. When the CL LED is ON (or lit) the Clean Channel is active. When the OD LED
is ON (or lit) the OVERDRIVE Channel is active.
TREBLE/MID/BASS controls
Tone controls or EQ. The BASS control boosts or cuts the amount of low frequency, or bass sound.
TREBLE does the same for high frequencies, MID adjusts the midband frequencies.
1
2
3
4
5
6
7
Front Panel
SPEAKER SIM Button
Speaker Simulator - Press this button to engage the Speaker Simulator. This button has two functions
1) When using headphones or the line out jack on the back panel engage the Speaker Simulator for a
“model” of the internal speaker - this is ideal for direct recording or jamming along with CDs or tapes
in the headphones.
2) Engaging the Speaker Sim when you are NOT using headphones or the line out will provide a
“creamier” tone to the EQ section. Experient with this and select different pickups on your
guitar...there is a wide range of tones available.
8
DIGITAL EFFECTS section
Built-in digital effects custom voiced for Rampage amplifiers. Please see “Digital Effects” section in
this manual for more descriptions of each sound and control operation.
OVERDRIVE Section
- GAIN Control Knob - Turning this knob clockwise determines the amount of gain (or distortion) added to the signal. A wide range
of amp tones are available on this channel from Classic American Rock to Heavy Metal.
- LEVEL Control Knob - Turning this knob clockwise determines the overall volume of the OVERDRIVE channel.
PRESENCE control
This master PRESENCE control tailors the overall high fequency at of the EQ section.
Downloaded from
manuals search engine