Rocktron Guitar Silencer - Manual (Page 7)

Descriptions continued.........
GATE Control - This control deteremines the
threshold at which the noise gate portion of the
effect will clamp to silence. The ACTIVE Led will
light when the GATE Threshold has been met.
RETURN Jack - Use this jack to return the signal
from pedals in the loop. This jack can also accept
a RTS Stereo cable and will merge a stereo effect
output (RTS) to mono.
9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC OnTap
9V power supply (sold seperately).
ACTIVE Led - This LED works in conjuction with
the GATE Control and will light when the GATE
Threshold has been met.
SEND Jack - Use this jack to send the signal to the
loop. From here, plug into the input jack of the
first pedal in the loop.
HUSH Control - This control deteremines the
threshold of the noise floor you want the HUSH
portion of the effect to reduce.
1
2
3
4
5
6