Rocktron Guitar Silencer - Manual (Page 8)

Descriptions continued.........
ON/OFF Led - This LED shows if the pedal is
on or off. When the LED is light the pedal is on.
When the LED is not light the pedal is off.
INPUT Jack - Using a standard 1/4” guitar cable,
plug your guitar into this jack.
OUTPUT Jack - This jack provides the output of
the pedal. Use a 1/4” guitar cable to plug into the
next pedal or into a guitar amplifier.
FOOTSWITCH - Use this switch to turn on or off
the loop. When the LED is ON, the loop is on (or
in the signal path). When the LED is OFF the loop
is OFF (or out of the signal path).
7
8
9
10