Rocktron Dreamstar Chorus - Manual (Page 4)

Introduction
Have you been dreaming about a cool new chorus unit for your setup? Take
a look at Rocktron’s awesome Dreamstar Chorus!
Part of the Rocktron Boutique Series of stomp boxes this pedal design comes
in a rugged metal chassis with eye popping retro custom design laser etched
artwork. This is a TRUE BYPASS pedal: when you turn it off…it is out of
your signal path!
The Dreamstar Chorus provides two independent chorus voice sections with
separate LFO Modulators, making this one sweet chorus pedal!
Chorus Voice One offers three controls called Rate 1, Depth 1 and Dream
1. Rate 1 controls the speed of the LFO waveform used to modulate delay
analog BBD delay line. Depth 1 determines the LFO’s maximum travel time
and intensity. Dream 1 controls the amount of effect present in the summed
output.
Chorus Voice Two offers three controls called Rate 2, Depth 2 and Dream
2. Rate 2 controls the speed of the LFO waveform used to modulate delay
analog BBD delay line. Depth 2 determines the LFO’s maximum travel
time and intensity. Dream 2 controls the amount of the effect present in
summed output.
Chorus pedals usually sound best when placed after distortion in the signal
chain. Thus, if you are using multiple stomp boxes, place the Dreamstar
Chorus after your distortion. If using a variety of pedals, such as delays and
other modulation effects, try the Dreamstar in different parts of the signal
chain until you find the sound you like best.
If you have an effects loop in your amplifier, try putting the chorus in the ef-
fects loop for a different sound; (just follow the instructions in your amplifier
manual when connecting to your effects loop).
The footswitch on the Dreamstar Chorus controls On/Off status (indicated by
the LED). This stomp box runs on a 9V Alkaline battery. You may also use
the Rocktron DC OnTap Universal Power Adaptor.