Rocktron Dreamstar Chorus - Manual (Page 6)

Descriptions continued.........
RATE 1 Control - This control determines the speed of the first
waveform
DEPTH 1 Control -This control determines the maximum travel time
and intensity of the first waveform.
9VDC Input - This input jack provides 9VDC power to the pedal from
the Rocktron DC OnTap 9V power supply (sold seperately).
DREAM 1 Control - This control determines the overall effect of first
waveform present in the summed output.
DREAM 2 Control - This control determines the overall effect of the
second waveform present in the summed output.
DEPTH 2 Control - This control determines the maximum travel time
and intensity of the second waveform.
RATE 2 Control - This control determiens the speed of the second
waveform.
INPUT Jack - Using a standard 1/4” guitar cable, plug your guitar into
this jack.
ON/OFF Led - This LED shows if the pedal is on or off. When the
LED is light the pedal is on. When the LED is not light the pedal is
off.
FOOTSWITCH - Use this switch to turn on or off the pedal. The On/
Off Led will show you if the pedal is on or off.
OUTPUT Jack - This jack provides the summed output of the effect.
Use a 1/4” guitar cable to plug into the next effect or into a guitar
amplifier.
1
2
3
4
5
6
7
8
9
10
11