Rocktron Texas Recoiler User Manual
Page 6
Advertising
![background image](/manuals/741209/6/background.png)
Descriptions continued.........
OUTPUT Control - Adjusts the final output gain 0db
to +3dBu
FREQUENCY Control - Adjusts Center Frequency of
the effect.
9VDC Input - This input jack provides 9VDC power
to the pedal from the Rocktron DC OnTap 9V power
supply (sold separately).
HP FILTER Control - Adjusts the amounf of “LOWS”
present in the signal.
WINDINGS Control - Adjusts the amount of gain
produced at the Frequency Center.
ON/OFF Led - This LED shows if the pedal is on or
off. When the LED is light the pedal is on. When the
LED is not light the pedal is off.
INPUT Jack - Using a standard 1/4” guitar cable, plug
your guitar into this jack.
1
2
3
4
5
6
7
Advertising