Rocktron Reaction HUSH - Manual (Page 7)

Descriptions continued.........
THRESHOLD Control - This control
determines level of attack to cause the HUSH
to activate.
9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC
OnTap 9V power supply (sold seperately).
ON/OFF Leds - These LEDs shows if the pedal
is on or off. When the LED is lit the pedal is
on. When the LED is not lit the pedal is off.
BATTERY COMPARTMENT and COVER
- The 9V battery can be found in this
compartment.
INPUT Jack - Using a standard 1/4” guitar
cable, plug your guitar into this jack.
THUMB SCREWS for Battery Compartment.
Unscrew these thunb screws to access the
battery compartment.
1
2
3
4
5
6