How to change the battery – Rocktron Reaction Compressor User Manual
Page 11
How to change the battery:
To change the battery, remove the thumb screws on
the top of the pedal and remove the battery com-
partment cover. Remove the old battery and replace
it with a new 9V Alkaline battery. Replace battery
in the same area as the old battery was located.
Place the battery compartment cover on the pedal
and re-insert the thumb screws.
Save yourself tons of money in batteries by using
the Rocktron DC OnTap Universal Power Supply
to power this pedal (sold seperately). The Rock-
tron DC OnTap provides a constant flow of power
to the pedal, unlike a battery that will degrade over
time. The Rocktron DC OnTap Univeral Power
Supply can also power up to 20 pedals and can be
used with both 110V and 220V power sources.
Check, www.rocktron.com for more information
on the DC OnTap and where to purchase.