Rocktron Reaction Compressor - Manual (Page 7)

Descriptions continued.........
SUSTAIN Control - This control determines the
amount of dynamic range limiting.
ATTACK Control - This control determines
amount of delay before compression occurs.
Turning the knob to the right produces a faster
attack and to the left a slower attack.
9VDC Input - This input jack provides 9VDC
power to the pedal from the Rocktron DC OnTap
9V power supply (sold seperately).
LEVEL Control - This control determines the
controls the amount of effect added to the output.
ON/OFF Leds - These LEDs shows if the pedal
is on or off. When the LED is lit the pedal is on.
When the LED is not lit the pedal is off.
BATTERY COMPARTMENT and COVER - The
9V battery can be found in this compartment.
INPUT Jack - Using a standard 1/4” guitar cable,
plug your guitar into this jack.
1
2
3
4
5
6
7