Denon AVR-1907 - Manual (Page 36)

Basic Operation Basic Operation
33
ENGLISH
ENGLISH
Listening to the radio
Check that the remote control unit is set to “AUDIO”.
Hold <PRESET •> and press <POWER> .
• The unit automatically begins searching for FM broadcast
stations.
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at preset
channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 to
F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory operation is
completed.
Auto preset memory
This unit is equipped with a function for automatically searching for
FM broadcast stations and storing them in the preset memory.
• If an FM station cannot be preset automatically due to poor reception,
use the “Manual tuning” operation to tune in the station, then preset
it using the manual “Preset memory” operation.
• To interrupt this function, press <ON/STANDBY>.
Switch off the unit using <POWER> . 1
2
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
CHANNEL
[FM/AM]
SHIFT
[ON SCREEN]
[TUNER]
TUNING
[MODE]
BAND
[MEMORY]
<POWER> CHANNEL
SHIFT <PRESET • > <ON/STANDBY>
<FUNCTION> TUNING BAND
Use <FUNCTION> to select “TUNER” or press
[TUNER] .
Auto tuning
Manual tuning
Press [MODE] to set the auto tuning mode.
• The “AUTO” indicator lights.
Press TUNING .
• Automatic searching begins.
• If tuning does not stop at the desired station, use to the “Manual
tuning” operation.
• “AM” or “FM” can be selected directly by pressing [FM/AM].
Use <FUNCTION> to select “TUNER” or press
[TUNER] .
Press [MODE] to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
Press BAND to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio ( page 34, 35).
Press BAND to select “AM”, “FM” or “XM”.
When listening to the XM Satellite Radio ( page 34, 35).
Press TUNING .
The frequency changes continuously when the button is held in.
1
2
3
4
1
2
3
4
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
• “AM” or “FM” can be selected directly by pressing [FM/AM].