ROHO SOFFLE 2 mattress overlay system operation manual - Manual (Page 11)

11
ATTACHMENT AND REMOVAL OF COVERS
Reusable Overlay Cover Attachment and Removal:
Remove all bed linens except support mattress pad or sheet from existing bed mattress. To attach the
Reusable Overlay Cover, unfold it and place the "feet graphic" at the foot of the bed. Stretch each corner
of the cover over the mattress overlay and bed mattress. To remove the Reusable Overlay Cover, pull
each corner up and over the bed mattress and mattress overlay.
Overlay Enclosure Cover Attachment:
STEP 1: Remove all bed linens except support mattress pad or sheet from existing bed mattress.
STEP 2: Referring to directional labels, place cover on top of bed mattress, unzip one side fully, and fold
the cover top to one side. Wrap the straps on the bottom of the cover under the bed mattress and buckle
to secure the cover to the bed mattress. NOTE: Overlay straps cannot be used with Overlay Enclosure
Cover.
STEP 3: Place the mattress overlay, cell side up, inside the cover. Align mattress overlay sections and
snap together.
STEP 4: Follow inflation steps in Adjustment Instructions for mattress overlay. Then, continue with step
5 of these instructions.
STEP 5: Reapply bed linens (maximum one sheet, one draw sheet or one incontinent pad). Unfold cover
top. Place end-user on the mattress overlay in their normal lying position.
STEP 6: Follow immersion steps in Adjustment Instructions to properly immerse end-user.
STEP 7: Once proper immersion is achieved, zip the cover closed.
Overlay Enclosure Cover Removal:
To Remove the Mattress Overlay and Overlay Enclosure Cover TOGETHER:
STEP 1: Transfer end-user to a different surface.
STEP 2: Unbuckle the cover from the bed mattress and remove cover with mattress overlay still enclosed.
NOTE: If placing end-user back on mattress overlay, ensure sections are snapped together and lying flat.
Continue with STEP 4 of the Overlay Enclosure Cover Attachment Instructions.
To Remove the Mattress Overlay and Overlay Enclosure Cover SEPARATELY:
STEP 1: Transfer end-user to a different surface.
STEP 2: Unzip one side of the cover.
STEP 3: Unsnap and remove mattress overlay sections from the cover.
STEP 4: Unbuckle the cover from the bed mattress and remove cover from bed mattress.
STEPS 2-3
STEP 5
ADJUSTMENT INSTRUCTIONS CONTINUED
ATTACHMENT OF OVERLAY STRAPS
NOTE: Four (4) Overlay Straps are included to aid in securing the SOFFLEX 2 and PRODIGY to the bed
mattress.
STEP 1: Attach one strap to each corner of the mattress overlay.
STEP 2: Stretch the straps around the corners of the bed mattress to secure the mattress overlay to
the bed mattress.
NOTE: Straps are provided with SOFFLEX 2 and PRODIGY Systems only.