Directed Electronics G312R User Manual
Page 25
22
© 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
■ H
H2
2//D
D B
BR
RO
OW
WN
N//B
BL
LA
AC
CK
K::
Connect the brown/black wire
to the master switch side of the unlock wire. The master switch
side will show (+)12V when the master switch is in the unlock
position and (-) ground when the master switch is in the middle
position.
■ H
H2
2//E
E B
BL
LU
UE
E//B
BL
LA
AC
CK
K::
Connect the blue/black wire to the
other side of the unlock wire.
*note: Except in GM cars with retained accessory power
(RAP). In these vehicles, the (+)12V feed to the door lock
switches is turned off if the doors are closed for any length
of time.
note: Most direct-wired power lock systems require 20-30
amps of current to operate. Connecting the violet/black
wire to a poor source of voltage will keep the door locks
from operating properly.