Directed Electronics G312R - Manual (Page 39)

36 © 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
Auto Learn function
This function provides a 1–step programming of the transmitter
to the following factory default settings:
➤ Button —Lock/Unlock
➤ Button —Channel 2 output
➤ Button —Channel 3/Instant output
Delete all Transmitters
In case the transmitter(s) is lost or stolen, this function provides
removal of all transmitter(s) access from the system memory.
Learn Routine will be exited if:
➤ Ignition is turned off.
➤ Program switch is pressed too many times.
➤ More than 15 seconds elapses between programming steps.
note: All programmable features will be reset to factory
default settings.