Max trim control, Dither, 1 max trim control – Sonnox Oxford Dynamics User Manual
Page 36: 10 dither
9.1 Max Trim Control
10 DITHER
9.1 Max Trim Control
The MAX TRIM control (only available when the WARMTH function is selected) allows very
fine gain trimming on the final output of the Dynamics processing. The purpose of this
function is to allow very precise alignment of maximum modulation levels, and the
accommodation of the differing meter characteristics, often found in ancillary equipment
used in production and mastering processes. A fine balance between digital maximum
modulation and target meter overload indication can be achieved easily using this
control.
10 Dither
A button (available with all section selections apart from S-C EQ) provides selectable
re-dithering function for word length reduction in mastering situations. The button toggles
between NO DITHER, 16 Bit Dither and 24 Bit Dither.